Home > categories > Hydraulic & Pneumatic > Water Pump > 1994 plymoth grand voyager leaking anti freeze is it the water pump?
Question:

1994 plymoth grand voyager leaking anti freeze is it the water pump?

I have a 1994 Plymoth Grand voyager and it is loosing anti freeze it was a little leak now I can't see it leaking but it is empty could it be the water pump? It does get hot now. what other things happen when your water pump is going out does the heater not get hot anymore?

Answer:

It could be the water pump, but without doing a pressure test it could be hard to diagnose. You can put cardboard or something else to help find the leak. But the leak could be somewhere else than the spot on the cardboard. Best to take to Advance, or Auto Zone and carry some water in a jug to fill it up and use a pressure tester and look and listen for the leak. Could be upper/lower Radiator hose, radiator, heater core, heater core hoses, and a few more that are less likely.
poss there is a pipe that runs under the intake! with seals on the end!
could be, refill and put cardboard under the car to see if the Water pump leaks... If it original- its probably due anyway
If okorder /.. This site will help you determine if the pump is going out. Question: is there an intense sweet smell? If so, your head gasket(s)may be where the leak resides. Most of the leak would burn from the hot engine causing the sweet smell. Does your vehicle overheat? How fast does the coolant drain? Due to cramped space for a minivan, I can understand how you can't see it leaking.
particular !! The water pump actual circulates the coolant/anti-freeze for the duration of the engine. A leak is a commonl occurance. If I had a dime for each waterpump I replaced that each and absolutely everyone started leaking coolant i would not could artwork back !! additionally, the timing belt is relatively of a good sized interest in case you're actually not a mechanic or in no way carried out it in the past. Its not in basic terms a do away with and replace interest. The crankshaft and camshafts could be placed (timed) suitable while changing the belt so as that the engine runs wisely and you do not reason any substantial injury. i could propose which you're taking it right into a professional which you believe and ask for him/her to take a glance and make a suggestion.

Share to: