Home > categories > Minerals & Metallurgy > Aluminum Foils > 3.75 hsp push mower stopped running.?
Question:

3.75 hsp push mower stopped running.?

I put a new spark plug inMy husband and I thought it might be water in gas so dumped out old gas and put new gas into mower starts but then stops runningMy husbad even pushed it about 3 foot steps and it stopped runningWhat could be the cause of mower stop runningThis mower is only 1 yr old

Answer:

There are a number of answers 2 quarters 10 cents 5 times 5 cents 10 times 2 nickles and 4 dimes 6 nickles and 2 dimes the list is endless of any of those combinations.
before you get into removing the carb, it may be a little simplerthe 3rd element of an engine is airon the side of the engine is a grated cover held on with a screw or thumbscrew that covers the air filterremove the filter and re-startif it runs then you just need to clean or replace filterwhile you have the filter off, get some spray carb cleaner and spray it into the hole that the air filter was covering(you would be looking at the carb intake)try to run againlastly: under the carb which you are looking at is a round metal bowl, usually aluminum colored, and has a nut on the bottomdrain the tank againremove the hose attached into that bowl, plug it if there is any leftover gasremove the bowl by unscrewing that nutfrequently you can get junk trapped there which plugs up the fuel to the carbclean the bowl, re-assemble, refuel, prime the carb by shooting the carb cleaner in the carb, and try againHope That helpsGood Luck!

Share to: