325 woodworking engraving machine, engraving 50mm thick MDF, need how much of the spindle, the Z axis travel what are the requirements? What knife do you need?
This is usually not needed high, only the relationship between material and thickness, as a relief, what material is solid wood furniture, with a certain thickness, and even some part is carved in a radian above, so the heightening of Longmen. Such as making only flat materials, such as density board, screen, wooden door carving, sheet type processing, do not need special heightening. Z axis travel and material thickness does not matter, because the material can not be placed, Z axis is able to down to the table. Machines need to be milled when they leave the factory. The stroke is not enough to make the machine. Good luck！ I'm glad to answer that for you!
And the knives should be long enough. There are no requirements for the Z axis, and the travel time is above 80. Don't worry about this. Such as cutting density boards, wooden doors, screens, and so on, Longmen in custom when it is required to heighten, of course, as long as it does not affect the processing.
Double edge straight groove knife, without slicing, ordinary density board single line cutting, then a knife can go down, I have not seen 50 mm, it is necessary to layered.
