After the lid of the toilet tank is covered, the water flows automatically
Based on my experience, check the two aspects:1. adjust the lever under the water release button (see the water tank lid in the opposite direction)2. check whether the automatic closing water switch in the tank is normally back and sealed tightly!If the above method can not solve the problem, it is recommended to call the toilet manufacturer for professional consultation. The hardware in the water tank is guaranteed, so don't neglect it!
Use and maintenance of toilet:1, if you use warm water to flush the toilet, water temperature control at 145 degrees Celsius, hot water do not pour into the toilet, so as to avoid the explosion.2, the toilet can not be rushed into newsprint, paper, urine pad and other easy to plug things.3, when the blockage, immediately with a leather suction device excluded.4, to prevent breakage and Water Leakage, do not impact ceramics, avoid hard hitting cover and seat5, please do not use steel brush and strong organic solution cleaning, so as not to damage the product glaze, corrosion pipeline.6. To keep the toilet surface clean and flush, please use long handle, nylon brush and soapy water or neutral detergent to clean the pipe and flushing hole. It is recommended to be cleaned at least once a week.
Toilet water tank lid lid after the automatic water flow, probably because the water tank lid on the button is too long, leading to the button has been in the open state, so the flow. The water storage tank of the toilet has a floating ball which automatically closes the water source. When the water level of the water tank reaches a certain height, the ball will automatically cut off the water source.
