Home > categories > Automotive & Motorcycle > ATV Parts > All terrain car into the sand, open in the desert, how to clean it?
Question:

All terrain car into the sand, open in the desert, how to clean it?

All terrain car into the sand, open in the desert, how to clean it?

Answer:

Car wash can be diligent, but not excessive. Often car wash can help you early detection of the beach car may have problems, such as oil leakage, or damaged parts. Long time to stay in the car body of the body will make the future work more difficult. And if there are insects stuck in the radiator above, long also easy to cause overheating problems. However, if the car too much, may wash away some of the wire on the lubricant, but damage the car. If it is running a long distance back, the beach car is full of soil, then you need to immediately a thorough cleaning. If this is a short run, then the simple clean on the OK.
High-pressure water guns must be used with caution High-pressure water guns can be very effective in the long-standing dirt, but also let the water into the electrical part or into some cracks where the formation of water, causing parts rust. So, if you must use high-pressure water gun, it should avoid the electrical parts, chains, seats and other parts, only need to focus on the tire and body shell just fine. High pressure water gun can be a good place to go on the chain of mud, but must remember to re-oil. Re-oil must be appropriate, too little impact riding, too much, then the oil will be running up everywhere. If you must use a high pressure water gun, the recommended pressure does not exceed 2000 psi.
Do not use water with water and suitable cleaning agents. Choose the right cleaning agent. Exaggerated to say that every part of the ATV has a professional cleaning agent. Pay attention to those with abrasive or universal household cleaning agents, because they may damage the paint or chrome parts. If cleaning agents are used, make sure their pH is between 6 and 8. In addition, it must be confirmed whether the cleaning agent will pose a threat to safety, for example, do not use ethylene in the cushion area, because after use, the cushion will shine as new, but will slip. If you intend to use a strong cleaning agent, you must wear rubber gloves.
Hello, first blow, put more first blown off! And then blown away and then cleaning, cleaning time to avoid electrical and wiring harness, etc.! [Car problems, ask the car master. 4S shop professional technician, 10 minutes to solve. To
Prepare the work before cleaning to remove the oil luggage, luggage and any other things can not touch the wet. Prepare all the car wash. You will use, bucket, cleaning agent, insect cleaning agent, degreasing agent, engine cleaning agent, toothbrush, lubricating rust inhibitor, cleaning tire brush, tire cleaning agent, polished polishing device, cotton cloth, sponge Time and place is also very important to clean the ATV try not to go to some unprofessional repair shop, try to do it yourself, do not wash the car on the road, because it is very dangerous. And do not rinse your car immediately after driving long distances. Give the beach car some time to cool down. Do not pour cold water directly on the hot engine. Do not wash the car at noon or before the sun, because the sun's direct, not waiting for you to come and remove the stains on the surface of the car, the water has evaporated. And tap water contains some of the mineral composition at high temperatures will be more active, easy to leave traces in the car, and will be difficult to be removed. Do not wash the car on the grass, because those chemical solvents will have a fatal impact on the plant.

Share to: