Home > categories > Construction & Real Estate > Metal Doors > Balcony of the aluminum alloy door how to install it?
Question:

Balcony of the aluminum alloy door how to install it?

Balcony of the aluminum alloy door how to install it?

Answer:

There are many types of balcony doors, the mainstream of hanging doors, sliding doors, folding doors, Pingkai Men, etc., choose what type of door need to take into account the home environment and decoration style, the general use of large sliding doors, small space can be Choose a folding door or open the door.
Reserved openings: the wall should be reserved than the aluminum windows and doors larger window, usually about 1.5cm each increase, 1.5cm on the increase, the next increase of 2.5cm to facilitate the installation of aluminum doors and windows, if the set size error Too large to cause aluminum doors and windows can not be installed when the builders should be responsible for handling. Lofting; aluminum doors and windows should be installed before the first set out the three baseline, as the installation of the preparation. 1. Center Baseline - Determines the center of the window. 2. Horizontal Baseline - Determines the height of the window. 3. Enter the baseline - determine the inside and outside of the window. Installation of the frame: the installation of workers in accordance with the above location, the installation of aluminum doors and windows to use the line fall, level, set the true level, the vertical position in the aluminum alloy frame around the use of wooden wedge fastening. Embedding the fixing piece: Embed the fixing piece in the concrete wall or brick wall with 3-4cm, fix the stone with 1: 2 cement mortar, or fix the welding piece with steel. Cement attachment: fixed piece fixed, the surrounding wooden wedge removed by the installer after the cement mortar caulking, so as not to aluminum alloy frame and the gap between the wall seepage. The following are the same as the " Reserved for watercrow sewn: aluminum alloy doors and windows after caulking, the outer edge of the frame around the edge of the paint, the cement workers need to 1cm square feet of the peg, reserved for plug water seam, after the paint set off to prevent leakage To fill, to prevent the infiltration of rain.

Share to: