Home > categories > Construction & Real Estate > Wash Basin > Bathroom wash basins how to repair ah?
Question:

Bathroom wash basins how to repair ah?

My bathroom washbasin, below the leak and the picture on the same, I do not care so gently press! The results of the things that off the above, and the following seems to be connected with the tube, the results of the tube can not get up, how to repair this thing ah? There is no guidance under the Supreme? So confused ah, sent 50 points, the success of the 50! The Add it, ah, I just looked at the water above the iron that I press off, inside the iron have been rotten, and there is a tube, the pipe above the link seems to link to the above that Iron, but I can not get enough to it, ah, next to the porcelain basin has been sealed, and I can not get ah! The The What should I do?

Answer:

Second, if it is the column pot situation, should be removed from the basin, with a wallpaper knife cut off the wall of the plastic, remove the basin after the flap with the female screw removed, watch remember the pad Up and down there, according to the original order will be installed on the new flap. And then glue the glue re-fixed. Third, if it is on stage pots, then this is easy, the basin does not have to remove, in the lower cabinet can operate the above process. If the basin is not a cabinet, is the case of closure, it must be removed part of the lower seal, and the basin is not possible. There is no other way. This live is very simple, no need to ask the plumber, their own look can be. Note: need tools: a pipe pliers, a wallpaper knife. If it is to live pots, need to have a one meter long fine steel wire, cut basin by the wall that part of the glue.
The flap of the water is broken and the flap should be replaced. First, the purchase of water flap: good value should be about 30 yuan, copper. If the waterline does not work, have to buy a next line. The sewer is the water hose.

Share to: