Jinfu calcium silicate board and Matsumoto easy hair board that kind of good?
Different types of raw materials, different processes and different production processes processed calcium silicate board used in the range are also different, such as fiber reinforced calcium silicate board using a variety of conditions under the composite wall panels and lightweight partition board, especially for Composite walls of the interior and exterior panels, public buildings and civil buildings of the partition board, as well as ceiling, ceiling. Fiber reinforced calcium silicate board moisture resistance is better, it is also suitable for humid environments, such as bathrooms, kitchens, toilets and basement. At the same time, fiber reinforced calcium silicate board is also suitable for the activities of the ground, can be used for computer room, fire and moisture requirements of the Treasury and warehouses and so on. The calcium silicate board is used for the general houses and commercial ceiling, cut off more common place.
For the two kinds of roughly the same new building materials, the production process with the copy method and flow slurry method. The thickness of the plate is 6mm ~ 12mm, the apparent density of about 600kg / m3 ~ 1200kg / m3 large-size sheet, can be used as buildings inside and outside the wall panels, ceilings, etc., suitable for the production of slurry thickness of 19mm ~ 32mm, the apparent density of about 750kg / m3 ~ 900kg / m3 of the plate. The use of copy or flow slurry method to produce calcium silicate board or fiber reinforced calcium silicate board has a heat, fire these two major performance.
Fiber reinforced calcium silicate board
Calcium silicate board and fiber reinforced calcium silicate board as a new building materials, are based on calcium materials, siliceous materials as the main binder materials and reinforcing fibers (the former fiber to inorganic mineral fiber, asbestos fiber and other loose short fiber to enhance Materials, which enhance the fiber to cellulose fiber, alkali-resistant glass fiber instead of asbestos fiber) as the main raw material, through the pulp, molding, high temperature and high pressure saturated steam curing made of new plate.
