Home > categories > Consumer Electronics > Camera Lenses > Camera and camera lens, in the south of the wet environment, the specific how to do moisture-proof mold?
Question:

Camera and camera lens, in the south of the wet environment, the specific how to do moisture-proof mold?

Camera and camera lens, in the south of the wet environment, the specific how to do moisture-proof mold?

Answer:

3. The general sealed type of moisture-proof box is made of high strength plastic (also has glue), the mouth is equipped with a rubber seal, the top of the pressure regulating valve can be solved because the negative pressure box cover can not open the situation. Internal moisture absorption device (moisture absorption card), and can be heated by charging to restore the dry state, repeated use. Most of the box is also equipped with a hygrometer.
??2. For the ordinary consumer level digital camera, if you buy a professional oven to save some obviously worth the candle, so we recommend a better sealed sealed box can be saved. Sealed storage boxes are generally sold in the supermarket, the size of the specifications are, the price range of 10-30 yuan, we can choose according to the size of the camera a suitable box. However, it is best to buy a good seal of the box, usually sealed with a sealed strip. The color of silica gel is the most commonly used moisture-proofing desiccant, it is dry in the blue, damp after the pink, then you can place the sun exposure or on the microwave oven, it turned back to blue, you can Use, and this silicone will not discharge toxic and corrosive gases, for the camera in terms of moisture is appropriate. General chemical stores have discoloration of silica gel, the general 10-12 yuan a can, 500 grams, the price is very cheap. Will be discolored silicone on the bottom of the sealed box, with a clean white cloth to do the isolation layer, the camera on the line on the line, in principle, do not let the digital machine directly touch the color of silica gel. One thing to note, put the camera before the first camera to remove the battery, with a soft cloth on the camera dirty and sweat clean. Finally, cover the lid, evenly press the lid to cover it, so as not to spill.
1. If the place to live is not very wet at the same time the camera commonly used, then do not need a professional moisture box and desiccant, only in the camera bag into a few packs of desiccant. We often eat some puffed food, such as "Wang Kuangxue" in the desiccant can be used. Method is: take a few bags of such desiccant, on the camera bag, ready to go to the tide, over a period of time, desiccant bag softened, according to the weather and shooting the actual weather changes, and then change a few bags The Simple and practical, lightweight and durable. But remember not to break up. If the camera has been due to moisture can not be used normally, you can put it in the air conditioning outlet, the air conditioning to the dehumidifier, blowing about 2 hours, it may ease the problem. For a long time without the machine, pay attention from time to time to the machine through electricity, but also to achieve the purpose of dehumidification.

Share to: