Can I install aluminum buckle plate and then install gas water heater?
I also intend to open the hole in the window, the water heater exhaust pipe below the buckle board, but my window glass is hollow glass, afraid of holes affect the insulation effect, then open the hole in the wall, exhaust pipe buckle board Above.
When the safety of the first aluminum plate, because the water heater has not arrived, but the seller (big shopping malls) to the exhaust pipe first to me, you can put the flap above the flue first good. An buckle board master said that the good buckle board can also be taken down, so do not worry. And later found that the pipe on the pipe in the pipeline at the junction of the seal, so when the water heater also called the master to take off the buckle, the exhaust pipe seal about.
1: the first installation of gas water heater or electric water heater, a boiler is also installed in advance.
2: Incidentally reminded, hood smoke pipe is also fixed in advance.
3: the final installation of the ceiling.
In the installation of aluminum slab ceiling, the kitchen, the first fixed hood hose flue, determine the location of the smoke, and then ceiling; bathroom, first installed Yuba, exhaust fan, and then ceiling. First must be ranked Yuba, gas water heater pipe. Install the front of the lamp, Yuba, the location of the discharge to tell the workers in order to determine the hole position. Yuba keel to install their own, or homemade simple wooden frame. Square plate application of light steel keel, with aluminum keel or galvanized keel, according to the measurement of construction drawings, drilling depth of 3 ~ 100px is appropriate to prevent damage to the wire and waterproof layer.
Can be installed in the aluminum plate after the installation of water heaters, smoke pipe can be directly out from the window.
The first installed after the equipment can be, but the aesthetic problem, the other gas water heater installed in the kitchen, no exhaust pipe, only flue, flue must be installed, you can cut a circle in the glass, the flue out of the window, the flue can not Installed in the closed buckle plate, because the use of his temperature is very high, very unsafe.
If I am not wrong, you are going to install the gas water heater in the bathroom, although it is strong, but it is best not to install in the bathroom, you are close to the kitchen, why not install the kitchen? Strong row of pipes can go out from the kitchen wall, but also solve the problem of buckle plate. You can not install the first water heater, set aside the water heater to take over, have the ability to buy some of the water heater.
