DX are good, recently renovated, the design of the ceiling is a bit complicated, and is relatively large area, contact the decoration team, they said that with the original ceiling, modeling part of the following to add a layer, and only gypsum board (I asked whether There is a wooden keel) he said no, when necessary, with light steel keel, because the time to the top of the wall but also posted the groove to the niche pvc carved, so would like to ask this ...
1. Can you use a large area of ??gypsum board to do modeling ceiling?
First of all want to ask, the landlord of the high level of how many, if not very high, then there is no need for a large area of ??the hanging, and secondly, the general home with gypsum board to do modeling ceiling is normal, large area can be used, Wood keel, high-end hardcover residential or tooling use light steel keel more frequently, but no keel is impossible, like the floor, no first layer is how can not cover the second floor, the landlord will not have wood keel Listen to no keel.
2. the top of the ceiling if the exposed, because the lights to what, will not be beautiful?
The top floor with the original ceiling, then you must re-paint, the home wall paint is sure to redo, the top is to brush, and the other formal decoration company will recommend the owner of the original wall of hydrophilic paint to eradicate, , If not eradicated, then live a few years, the new wall paint will be from the drums, cracks and even peeling; and if installed lights, especially the installation of living room chandeliers, crystal lamps, it is best to install the original ceiling stability , If you want to install ceiling ceiling, then the keel must be reinforced, so there is no need.
3. If the use of the above process, after the paste wallpaper, niches carved, will have a security problem?
If the above process is based on the formal process of construction, then there will be no problem, the landlord will remember to find the regular companies do not look for outsourcing construction of the guerrillas, a problem can not find people, especially hydroelectric projects, especially this Important, regular company words are out of the water and electricity spare drawings and 5-year warranty period.
Personal experience hope to be useful to you.
1. Can you use a large area of gypsum board to do modeling ceiling? ---- "No, need keel
2. the top of the ceiling if the exposed, because the lights to what, will not be beautiful - "beautiful
3. If you use the above process, after the wallpaper, niches carved, will have a security problem ---- "No keel hanging on top, the top are not on the safe to say, the top are hanging on what security The
I agree with the recommendations of the home improvement company. Like your home improvement users, if the original ceiling is not smooth, will consider the use of gypsum board leveling, but the gypsum board to be used with light steel keel, but so your living room height will be greatly reduced, it is not recommended. In fact, many high-end hardcover residential, is the use of 20mm high keel with 9.5mm thick ordinary gypsum board for the ceiling leveling, your home improvement on the free bar.
Direct use of the ceiling, not beautiful, but also on the paint. With the surrounding shape of the ceiling, is also very good to see, but the proposed light to the simple atmosphere.
As long as the installation properly, try to use light steel keel instead of wood keel, there will be no danger.
Recommended brand: Lafarge, Jieke, can be resistant
