I bought the integrated ceiling of Op, want to put it in the dining room, the top of the dining room for the gypsum board ceiling! Now installed to find the lamp and wood keel fixed dead, resulting in the lamp to be fixed after the demolition of the plaster must be removed top! Is there a way to solve it?
Can not be directly installed in the above ,,, to be installed on the keel ,,
Integrated ceiling, etc. are generally inlaid into the hungry direct ea gypsum board hole can be broken if the keel can be on the keel to the keel or can not find the keel to open a small hole plus a piece of bone on the screw can be
I looked at the picture of the lamp is 600 * 300mm embedded installation is a dome, in fact, this can be more easy to install your. You just open a rectangular hole in the position, the hole according to the dome of the embedded body size to open, if the gypsum board edge without keel, in the edge of the mosaic of wood can be fixed to install.
Yes, you can install the place in the center of the place, open a hole into the 50mm wide wood, the length of the wood according to your ceiling inside the keel spacing, the general 250-300mm length, attached to the ceiling inside, with self-tapping screws The wood and gypsum board fixed, and then install the lamp can be.
