Home > categories > Home & Garden > Blocks & Roll Bags > CNC turret can be turned into 45 degrees ah? Can you turn counterclockwise?
Question:

CNC turret can be turned into 45 degrees ah? Can you turn counterclockwise?

CNC turret can be turned into 45 degrees ah? Can you turn counterclockwise?

Answer:

The ladder diagram change tool holder, the transmitting plate and the cutter platform. The rest eight station just around forty-five degrees. I know there are six knife position, do not know there is no rest eight station, we some time ago in the factory in Ji'nan first machine tool factory bought a large number of CNC lathe, turret is counterclockwise, clockwise to lock, in contrast with the rest order general.
You mean it is not a simple numerical control of the car on the four bit, only in one direction, this may not be achieved, unless there is a problem. Eight knife position is the kind of post, you can, as well as 12 knives, each turn only about 30 degrees, you can choose the nearest, the direction of the two can be.
8 position of the numerical control turret, each turn 1 knife is 45 degrees, can be positive and negative (that is, clockwise and counterclockwise rotation)
For the eight position of the tool holder, every turn a station just turn 45 degrees.Can you turn counterclockwise? This depends on the structure of the turret, some can, some can not. The 4 position and the 6 position of the tool holder with the Holzer element as the detection signal can not be selected by the nearest knife. The utility model adopts an encoder as the detection signal of the electric tool holder and a proximity switch as the hydraulic head of the detection signal. The nearest knife also need to prepare the appropriate PLC ladder diagram.
Numerical control machine tool holder can be numerically controlled turret also has an electric, hydraulic knife. CNC turret and part of the NC cutter can turn 45 degrees and counter clockwise. Part of the electric, hydraulic tool holder can not turn counterclockwise.

Share to: