Corner in the touch delay switch Why switch the switch after the light is very short time
Is the internal design of the switch, the main consideration is to save electricity.
This I tell you, the inside of the capacitor for large on it
The new purchase is not necessarily the new factory, it may be put in the store for a long time, resulting in the capacitance capacity of the attenuation; there is also possible that the product quality is not the unqualified batch. It is possible to use energy-saving lamps or electronic fluorescent lamps, for non-support these two lights delay switch will appear difficult to use the situation, you try to replace the ordinary incandescent may be good. The lamp is not the case, and the switch can be opened, but the delay time is too short, it should be capacitive capacity attenuation, the same capacity with the voltage or slightly higher capacitance try, such as the original is 100uf 16V can be replaced by 100uf 16V or 120uf 16V, which is used inside the capacitance of the small, the general wholesale price of a few cents to buy should not expensive, the key is that you can find the purchase Local, electrical repair shop or electronic components firm's fortunately there will be Kazakhstan.
