When decorating, enter the door to protect the film, with what glue paste? Usually use sealing tape, a lot of time paste is not smooth, seriously affecting the appearance and image of the company. But the glue needs to be cleaned easily after the decoration is finished! Seek advanced or expert pointing!
Standard for entrance door protection1, door door with the company's unified door stickers for full package protection, with transparent tape will protect the film paste firmly.2, "please forgive me" the words of the frame along the height of 1700 mm, the door labeled "understanding" frame in the middle position, if the door leaf is a composite door, door stickers on "understanding" should be in the parent frame on the door, and maintain the integrity of the pattern.3. Use the standard protective film to protect the three sides of the doorframe intact and firm.
The door door is made of inkjet material, which is still sealed with tape, and will stay flat as much as possible. Some outside may use soft protective film, but most will still use adhesive tape to seal, and the possibility of using glue is very small.
4, after the completion of the project to remove the protective film, if there is glue mark affixed, the use of alcohol or special cleaning agent to remove glue marks.Door handle1, when the door handle door protection for the aperture, and a transparent tape will handle below the door stickers fixed firmly, the standard of protective film cut into 50 mm wide strips, door handle wound protection, transparent adhesive tape fixed firmly in use can not fall off.2, interior doors installed after the door handle wrapped with plastic wrap and complete sellotaped firm.Standard for finished product protection of windows1, the company unified production of posters posted out word in the middle position around the window, the posters along the 500 mm away from the window sill, no window from the ground 1000 mm.2. Use standard protective film to protect all indoor window fixing fans. The sign is outwards and the sign or word on the protective film is kept flat and vertical. The protective film is laid flat and firm.
