Home > categories > Construction & Real Estate > Gypsum Ceiling > Do you have a ceiling fan with a gypsum board?
Question:

Do you have a ceiling fan with a gypsum board?

Want to use gypsum board ceiling ceiling ceiling fan, do not know whether it is feasible.

Answer:

If the weight of the ceiling fan in general, then in the position to be installed, cut part of the gypsum board, increase the local strengthening keel, after the installation of flattened gypsum board (make up after the scraping putty, brush paint, can not see any traces).
All the layman! Of course you can install: There are several ways, if the weight of the ceiling fan in general, then in the position to be installed, cut part of the gypsum board, increase the local strengthening keel, after the installation of plaster board (make up after the scratch putty, fill paint, see Do not see any traces). If you want to hang the fan is relatively heavy, it would cut the gypsum board area is relatively large (a person's head can be stretched out) after the hanging bar (metal hanging bar) and the original building structure ceilings and installed pre-embedded structural parts, Seal the top, and finally install the ceiling fan on the embedded parts. In short, will be able to install! As long as you are not afraid of trouble no problem.
Strictly speaking, in the gypsum board ceiling ceiling fan is not safe and beautiful, even in the keel is not safe. If you really want to install the proposal is only one way: first install the location of the gypsum board removed in the top of the top of the cement to install an expansion hook, specifications at least 14 mm or more. And then hook down to hang a 10 mm round bar to the top of the top of the gypsum, the bottom hook hanging ceiling; with the ceiling fan connected to the hook as small as possible, but to ensure safety. First remove the gypsum board to open a hole with the same size of the hole, through the round bar hook can be installed after hanging ceiling.
If you want to hang the fan is relatively heavy, it would cut the gypsum board area is relatively large (a person's head can be stretched out) after the hanging bar (metal hanging bar) and the original building structure ceilings and installed pre-embedded structural parts, Seal the top, and finally install the ceiling fan on the embedded parts.

Share to: