Home > categories > Packaging & Printing > Plastic Film > Do you have adhesive for plastic film?
Question:

Do you have adhesive for plastic film?

Do you have adhesive for plastic film?

Answer:

The main ingredients of polyethylene for delta ethyl cyanoacrylate glue. In the air of trace water under the catalysis of additional polymerization, rapid curing and adherend glue.PE and PE (polyethylene) materials, and PE (polyethylene) and all plastic, metal, wood, ceramics, stone, rubber and other materials of the fast, perfect bonding. The adhesive strength can reach the super effect of tearing material.
1, do not wear knitted gloves, KD-800 series of special rubber gloves are woven material absorption will rapidly produce high heat polymerization reaction, will burn your hand, so please remember, don't wear gloves knitting.2, if the eyes accidentally come into contact with hard cured glue will hurt the eye, do not use hand rub, and immediately rinse with plenty of water or warm towel and heat, the eyelids sweating apart, do not force open, serious and send to hospital for emergency treatment; skin contact with warm soapy water, soaked with acetone KD series solution of glue removal.3, the KD series of flash drying steam is irritating. Please use the ventilation system in the workplace when used in large quantities.4, when there is a lot of leakage, you can use water to cure and then scrape.
Usage method1, the use of dry cotton cloth or sand paper will be followed by dust, oil, rust and other removed, and then acetone or trichloroethylene cleaning agent such as cleaning, to clean the surface.2, unscrew the front cover, you can use; bottle mouth is too big, bottle mouth if there is glue, first with cotton cloth will glue wipe clean, and then can be put on the needle or PE dropper after use, to control glue flow, guarantee the use effect.3, in the face is then drop a little KD-811 then agent, immediately bonded, and keep to hardening, hardening time ranging from a few seconds to a few points. About 30 minutes to reach practical strength, 24 hours after the maximum intensity.4 clean the bottle after use and cover the lid.5, after use, please store the glue in a cool and dry place.

Share to: