wic iring codes for turner plus three wired to uniden washington cb radio
Typically there are 3 wires. The shild is ground. Of the remaining two wires, one is push-to-talk and the other is the audio lead. Find the push-to-talk (switch) lead by checking continuity from the shield to each of the other two wires. On one of the remaining two, there will be continuity when the mic is keyed. That is the switch lead, and the other one is audio.
I love wiring questions :) do you want to use the PTT? If yes you can assume it is a switch and solder it inline with the lead the other end (after the switch would be connected to the lead end of the 1/4 if you have a pigtail 1/4 then this would be the insulated wire, the ground would simply connect to the uninsulated wire if you are actually using a do it yourself 1/4 plug then the same rules apply only you are soldering to the terminal inside the plug sleeve rather then to bare wires (I always prefer this its cleaner). Please Note: The PTT switch will cause a loud pop when it is engaged and released on a Hi Gain guitar amp and sometimes this can damage the speakers as well as delicate internal components so do this of coarse at your own risk.
