Electric basket acceptance should pay attention to what problems?
6, basket hanging platform should be installed around the security barrier, the work surface guardrail height is not less than 0.8m, the rest of the site is not less than 1.1m, the bottom should be set height of not less than 150mm baffle, the bottom plate has anti slip measures. The vertical inclination angle of suspension platform should not be greater than 8, and the suspension should not be greater than 1.5m.
The installation and disassembly of the basket (including the two shift) is carried out by the property right unit. Basket installation and disassembly (including the two shift) before, should develop the installation and disassembly program, and reported to the general contractor units and supervision units for the record, while the installation of workers to carry out safety technical disclosure. The general contractor shall ensure that the installation conditions are met at the site. The installation and disassembly of the basket (except the Porter) shall be valid for the construction operation qualification certificate of special construction operation. It is forbidden to install or disassemble the gondola without permission.
4, the personnel shall pass the examination and obtain valid certificates before they can be operated. A basket should be only two people and the following personnel work at the same time, work prohibited to stand under the basket, prohibit cross operation. 5, the main structure of the basket shall not be deformed or obvious corrosion, the main welding seam should not crack and open welding, each connection bolt should be fastened to meet the requirements.
2, basket installation and disassembly operations should be set guard area, designated special person responsible for unified command and custody, prohibit irrelevant personnel access to the job site. 3, after the installation of the basket, the general contractor, the rental unit, the use of units, supervision units should be checked and accepted, and fill in the "construction machinery inspection and acceptance table" (table AQ-C9-2). Basket by acceptance qualified before use, without acceptance or unqualified acceptance, shall not use.
