Home > categories > Construction & Real Estate > Handle & Pull > Electric car controller and handle the controller of the three turn the line and turn the hook after the connection regardless of how to turn the wheel will not move, but the red or green line
Question:

Electric car controller and handle the controller of the three turn the line and turn the hook after the connection regardless of how to turn the wheel will not move, but the red or green line

Electric car controller and handle the controller of the three turn the line and turn the hook after the connection regardless of how to turn the wheel will not move, but the red or green line

Answer:

1. The color of the transfer line is generally red, black, blue (blue line may also be other colors), the controller then turn the line is red, black, blue (blue line may also be other colors), below Of the controller to the above transfer between the wires only for reference, when wiring to ensure that the handle and the controller (black docking, red docking, blue and blue) docking Caixing. 2. red and red docking, blue and blue docking does not accept the black line, the controller is running at full speed is normal (because the ground is not). 3. When the wiring should be black, red, blue order of the line. 4. If I said after the line after the motor is still not turn, that is turned bad (the controller is nothing)! 5. turn if the replacement in rural areas, then the general price of 5 to 20 yuan or so, if there is no price in the city (black).
Your turn is broken. Change it 8 dollars.High point comfortable
Black line may be broken in the middle of the place, with a multimeter to know what to know ~! You said the controller out of the red and green voltage 4.8V, then connected to the handle after the voltage on the 0.4V, the normal should be around 0.8V, twist turn when the voltage will rise, if not raised is Turn fault or black negative line breakpoint!

Share to: