Home > categories > Construction & Real Estate > Tile > estimated cost of tiling bathroom walls?
Question:

estimated cost of tiling bathroom walls?

I‘m thinking about having a bathroom tiled. The bathroom is about 6 by 8 and right now the walls have a horrible pink and black alternating ceramic tile that goes up about 4 feet on the wall all the way around. All I want to do is replace this tile with a glass tile. I have no idea what the cost would be for materials and labor so any estimates would be appreciated. This is the only work I need done.

Answer:

In UK ?10/m2 + cuts for labour only is a fair price and you supply everything for the job!
One way to lower your costs would be to do the tile demolition yourself and then buy a less expensive field tile for most of the walls and add in the higher priced glass tiles in random places or to form a pattern in a special place-- say above the sink or around the shower head area, etc. Do you really want that much glass tile?
Removing old tile and backer board, replace with new backer board and new tile with average tile and size $5000 to $10,000. With glass tile and special setting material for the glass tile about 2 to 3 times the above. The best way is to shop at a tile or flooring store to get a real price for your area as price vary by regent. If possible get the material and installation from the same place.
If you live near a Floor Decor Store, you should be able to find a decent glass tile for around $2.00/ square foot. Now, assuming it is on all four walls covering every bit of those walls, 4 ft. high, that would be about 112 square feet. Plus, you always need to buy around 15% waste. So, total you would need to buy 129 square ft. of tile. You also would need Mastic to put the tile on the wall, should cost you $50 or less for enough to tile the area you have. Labor should run you about $500-700 for the removal of the old tile and installation of the new tile. There is however one issue you might not have thought of. If you remove the old tile, it will most likely destroy the walls it is attached to. From the way it sounds, this is old tile that was installed using something called a mud bed. This is basically metal wire and weakened concrete. All of this will have to be removed and new sheet-rock or green board will have to be installed. The cost of this would run you another $600-800 in labor and materials. So your worst case scenario, would run you around $1800. If you happen to be in the Atlanta, I would be happy to take a look at the job. I have 10+ yrs. experience as Home Depot Certified Flooring Installer

Share to: