Expansion ratio of lightweight corundum refractory bricks
Now with the production of lightweight foam corundum brick, basically still meters with molding casting, moulding after together with die in the drying room drying in 60~70 C 4 days of release, then the appropriate drying, finally after 1300 and 1550 C firing, the total burning time: 50~60h. Light corundum brick after firing is usually not the size and shape of accurate, so that products after the kiln to mechanical or manual cutting, can be made into a density of 0.8 - 1.3g/cm3, 4MPa compressive strength and porosity, the thermal conductivity of 70%~80% 0.17W/ (M - K), light-weight corundum brick use temperature of 1500~1700 DEG C.
Light corundum refractory brick, because of its production methods and the introduction of different additives, there are certain differences in the content of Al2O3, just burn add general light corundum refractory brick and foam and gasification method cannot be made, the content of Al2O3 is generally not more than 99%, with alumina hollow ball manufacturing transfer are corundum brick with high content of Al2O3.
