Home > categories > Electrical Equipment & Supplies > Other Wires, Cables & Cable Assemblies > Fiber optic cable split box, integrated wiring box, cable terminal box, cable transfer box difference
Question:

Fiber optic cable split box, integrated wiring box, cable terminal box, cable transfer box difference

Decoration when the purchase of water pipes, wires and other items included in the account

Answer:

Outdoor fire line must use fire-resistant KVV cable, wear pipe protection.
KVV is the control cable, generally do industrial control; and RVS is twisted pair, generally used for weak system, to eliminate the interference requirements of the occasion, such as two-wire bus system, specifically, the electrical fire bus more Such as RS485 bus and so on.
A lot of ways ah! You look at the back of the set-top box, a total of three kinds of interfaces, namely, HDMI digital signal (while transmitting audio and video signals), red and yellow and yellow chicken complex habit of glycosylation moxibustion slim faint handle (red is the right channel, white Is the left channel, the yellow is the video), the color difference signal (red, green and blue, only transmission video), S terminal (single hole four pin, only transmission video). You just put the video to the TV, the audio to the amplifier on the line. . if your amplifier does not have HDMI interface, then put the set-top box HDMI connected to the TV, the set-top box red and white two terminals, connected to the amplifier red and white input terminal, and adjust the amplifier to the appropriate channel The . if your amplifier has HDMI interface, then through the HDMI series on the line, the first amplifier or the first TV will do. . TV set after a lot of them, there is a group of AVOUT output interface, this group of red and white terminals connected to the power amplifier is also OK.

Share to: