Floor banding how to install, please expert pointing
Use glass adhesive buckle.
Just fix it with glass glue.
Edge banding is used in wood floor or around the edges and corners of the place, the use of conventional edge 45*45 of the wood edge thickness is 6mm; and 45*45 Aluminum Alloy edgebanding. Use 4*25 or 4*30 stainless steel self tapping screw, the distance between the screw and the screw is about 35cm. Edge banding, installation, splicing must also stay 5~6mm gap, corner corner of the best installation, so that both beautiful and difficult to deformation.Install sealing strip must be fixed screw before using a pistol drill guide eye, the size is larger than the lead screw diameter slightly smaller, in the edge on the eye, you must use the wind cone drill head and groove, so that the screw is screwed into the slot, so that the surface is flat.
Cool breeze, green floor, tell you: use nails and glue.
