Home > categories > Construction & Real Estate > Tile > tile dilema - too difficult to remove?
Question:

tile dilema - too difficult to remove?

Following on from my previous question about tiles... I had asked if it's better to remove them or tile over the top. At that time, I thought they were bedded in the same stuff as the bathroom tiles were upstairs which was a very fine and compacted sandy stuff that was not set.However, after trying to remove a couple of the mosaic floor tiles in the kitchen, it seems they are bedded in the actual concrete floor itself !!! and instead of being able to remove them, it just chips the tile and breaks off the surface somewhat. They're extremely difficult to remove so: Will my new tiles be completely ok if set on top of these? can you please let me know how to prepare them and what to look out for?Height-wise it doesn't matter, I'll simply order shorter doors. I'm really concerned about the long term strength because it's a kitchen that will get a lot of use / humidity/ etc...Thank you

Answer:

You may be able to do it as the last guy answered, but I would never guarantee the results in the long run. The proper way is to chip up all the old tile and start from scratch.
You can set tiles over tiles . You ll need to get a thin set that is modified to do this. Check on the back of the bag it will tell you . The price will give it away too lol.Tiles must be clean and oil free of course.The one step some people don t do that I do every time I do this. You must wait a day or two extra before going in and walking and grouting these tiles. The thin set needs extra drying time since moisture in thin set can t go any where. If your doing it your self no problem. If some one else does it ask them to do it on a friday and grout on monday. Or if that can t be worked out , have them do it and possible go do another small job and come back in a couple days to do it. Any questions you can e mail me GL
looks like a serious problem...but u cannot tile over tiles-they will cause slipping and the fresh tiles will never set. best-use a really heavy tool to break the tiles and sewwp off the chips... then overlay with a finishing smooth layer of concrete and embed ur new tiles in it

Share to: