Home > categories > Hydraulic & Pneumatic > Gate Valve > Gate valve DN65 what does that mean?
Question:

Gate valve DN65 what does that mean?

Gate valve DN65 what does that mean?

Answer:

Caliber 65, refers to the size of the gate valve, you want to buy it?
Nominal diameter 65 gate valve.This depends on the material of your valve, it is new material, it is to use the outer diameter to do the standard, specifications with 63.75, and so on, because the new material is welded or coated with glue connection. So use the outside diameter as the standard, or the gap will appear.There is also the metal standard, according to the nominal diameter, or flange connection flange and skein skein are industry specifications.When it comes to the end, it must be between the pipe and fittings must be connected.
DN65 indicates that the valve bore is 65CM.The gate (gate valve) is a headstock ram, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed doors, discomfort pumpsparameters vary, usually 5 degrees is not high, medium temperature is 2 degrees 52'. To improve its manufacturability, make up for the deviation of the angle of the sealing surface during processing. This gate is called an elastic ram.

Share to: