Home > categories > Construction & Real Estate > Gypsum Ceiling > Gypsum board ceiling wood keel between the standard spacing how much
Question:

Gypsum board ceiling wood keel between the standard spacing how much

Gypsum board ceiling wood keel between the standard spacing how much

Answer:

Home wood keel craft Home improvement commonly used wooden keel ceiling, the general process is this: 1, read the drawings, fully understand the drawing shape 2, the wooden side planing, brush on the fire retardant coating 3, on the wall pop-up ceiling horizontal line, and according to need, at the top of the first fixed a few longitudinal keel 4, the production of keel frame, the first on the ground first nail, shaped top application of blockboard model 5, The rod will be fixed wooden keel, and pay attention to adjust the level and vertical degree 6, set aside the lamp base or lamp slot position 7, by the electrician will be connected to the wire, and leave the thread 8, the cutting gypsum board with self-attack Nail fixed
Wood keel spacing ?1, with the horizontal tube to find the level of the point, with the ink bucket along the horizontal point of playing the horizontal line; 2, light steel keel: wood keel for the edge of the dragon, the lamp slot position with wood keel or woodworking board production, there are wood production office to brush fire paint, keel at least 50, spacing 30 cm is appropriate, hanging spacing 60-80 cm Is appropriate, gypsum board and board between the people to set aside 5-8 mm gap, gypsum board self-tapping screws 1-2 mm and anti-embroidered treatment, to be smooth and solid, shaped to do smooth lines; 3, wood keel: keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging spacing 60-80 cm is appropriate, hanging bar is strictly prohibited direct use of wooden wedge nails to the top, brush tight fire paint until the wood keel color can not see , The keel on a layer of full-legged rice eucalyptus core 9% board and then on the gypsum board, gypsum board and board between the people to set aside 5-8 mm gap, gypsum board self-tapping screws 1-2 mm and do Anti-embroidered treatment, to be smooth and solid, shaped to do smooth lines; 4, aluminum plate: strict requirements level, light steel keel bayonet to be aligned, keel spacing of 50 or less, hanging spacing 60-80 cm is appropriate, the board when the hand to light, so as not to press the board to the pit And the contact with the tile is not tight to use the sealant to play tight; 5, aluminum-plastic plate: wood keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging spacing 60-80 cm is appropriate, brush tight fire paint, keel on a layer of full-legged rice eucalyptus core With a universal adhesive paste aluminum-plastic plate, aluminum-plastic plate and the board between the reserved 3-4 mm gap, has been filled with other colors to play the effect of grid, to be smooth and solid, shaped to do smooth lines , The angle of the fold surface can not be broken

Share to: