Home > categories > Construction & Real Estate > Tile > Has anyone painted bathroom tile?
Question:

Has anyone painted bathroom tile?

I have a very outdated bathroom with pink tile covering just about every wall. I love to do DIY projects but can‘t afford to replace the tile. I can however afford to paint it. I read up on it and found the paint directions but don‘t want the end result to look tacky. Has anyone done this and liked the results?

Answer:

have seen it after was completed came up reasonable you have to clean the tiles then apply a special primer then the tile paint there are pens around that can redo the grout lines. you must get the correct materials and follow everything as recomended the paints are not cheap. they might not have those paints in the. U.S.
I had probably the same tile in my bathroom. It was half way up all walls and around the tub.. When I moved in (5 years ago), I cleaned, primed with original Kilz, and painted 2 coats of Zinsser Perma White paint in a satin finish. After 5 years and at least 3-5 showers a day, I have had to touch up a couple spots. You can definately tell it has been painted with a brush and roller, I think it looks a lot less tacky than pink tiles.
Go for it! It won't look tacky if the instructions are followed. Be sure to very thoroughly clean the tile with a cleaner made for tile and grout, and use a scrub brush to scrub the tile and the grout lines well. If you plan to also paint the grout, you must let the grout dry for at least 48 hours. The longest lasting paint for this application, and one that with withstand peeling the longest, is oil-based paint. The cleanup process for oil-based paint could be a drawback, but for a long lasting finish it is the way to go. If you don't want to go with oil-based, water-based paints that contain a urethane resin are good paints to use as well. I would strongly recommend not painting the tile on the walls of the tub/shower, as the finish will not last due to the moisture and humidity in the shower. For this area, you can use a tile epoxy paint (usually available in white and creme color) and it will look good and protect the tile from the water. If going this route, be sure to ventilate the area as best as you can as the fumes are strong...but they will go away after 1-2 days. You can do this project, and it will look good. Best of luck!

Share to: