Home > categories > Construction & Real Estate > Tile > Has anyone sucessfully drilled into tiling or how do I remove tiles?
Question:

Has anyone sucessfully drilled into tiling or how do I remove tiles?

Have a tiled half wall that I dont like, and as I neither know how to remove tiles or if how to drill through a tile can anyone help?

Answer:

You just get a chisel and a hammer and pry them from the wall. If they are on concrete, then you use a really big chisel and hammer. *The sheetrock may come down with the tile.
Use masonry bits in the drill. Start with a small hole and keep using larger bits to increase the size of the hole rather than trying to drill a big hole from the start. It helps to wet the end of the bit. If the hole has to be in a precise location, put a piece of masking tape up and put a mark on the tape exactly where the hole will be. The tape will help keep the drill bit in the spot where you want the hole, rather than having it skip around as it usually would do on the slick tile surface. Put the drill on a slow speed at first to get the hole started if the drill bit is trying to skip around.
A bit for drilling concrete works well , also they make a spade bit that can be used for tile or glass, If it is a thick tile i would use a bit and a drill with the sds chuck as it won't slip. You can get the bits at Home Depot of just about any hardware/lumber supply store. the drill with the sds chuck can be rented if you do not have one.this is if you are trying to anchor something into the tiled wall. If you want to remove the tile, you are better to pull the tile and drywall off at the same time , if you try removing the tile alone it will damage the drywall and you'll have to float the whole thing or remove it anyway. Good Luck !
Standard masonry bit will go through most all tile..Depending what and why you want to drill through tile for, there are some tricks to make it easier.. If you want to take the tile down, the easiest way is to cut through the dry wall just above the last tile row. Pull down all the dry wall. By the time you take tile down and the damage that ll be done to the dry wall, its easier to remove and replace it all.. Any questions you can e mail me through my avatar and check my qualifications there. GL

Share to: