Press shift + space can not switch the wiring mode there are other ways no more
You can try each choice ah, to really sure to check the TV set up behind the set-top box is connected to the line which can be connected
The design requirements of the pipeline must be applied to the dark one is beautiful in a pipeline installed, then unsafe trunking laying in the pipeline or the basement of the garage laying the pipeline is suitable for threading like cables are generally walking bridge to take the pipe well trough cable Bending radius is too small is not easy to dark but the municipal engineering power cable laying the diameter is a great maintenance of the tube is equivalent to laying the wire when the cable box to be based on the project
Your problem is unlikely to be a hardware problem is likely to be set or protected may be when you plug in the U port a charged thing and then lead to this situation for my reprint if it does not work, then the landlord Google HI I, I am interested in this comparison hope to help you [a USB device is running normally and has exceeded its hub port power limit. The connection to this device should be interrupted. How to solve this? This is mainly due to the BIOS in the USB boot option to open or not the correct set of reasons. After entering the CMOS settings, in the system startup sequence, there are "FDDUSB" and "HDDUSB" option, which is the USB boot option, so the system boot sequence should be set to USB first. But some old motherboard does not support USB boot, so it can not use the flash disk. Modify the registry at the beginning ---- procedures ---- run, enter regedit to enter the registry to find the registry key HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services UsbStor, the right "Start" value data to 1 (for Hexadecimal), determined and restarted. So you can use the USB interface, there is another possibility that the USB interface is insufficient power supply, please use the USB extension cable to connect to see]
