Home > categories > Transportation > Bus Wheels & Tires > How about the tread?The pattern is based on the safety line
Question:

How about the tread?The pattern is based on the safety line

How about the tread?The pattern is based on the safety line

Answer:

The pattern is based on the safety line. The middle safety line has a convex position in the groove of the tyre pattern, and the safety line is triangular. When the tyre is used to the safety line, it must be replaced, or it will slip.Pattern is not only a decisive factor in the appearance of a tire, but also relates to the performance of tyre traction, braking, cornering, drainage and noise. It is mainly made up of pattern groove, pattern block and pitch.
Two, horn patternThe pattern groove is vertical to the circumferential directionAdvantages: good braking and handling performance, good traction performance.Disadvantages: high speed noise, due to large rolling resistance, is not suitable for high-speed driving.Application: dump trucks, industrial vehicles, and rear wheels of buses running on poor roads.
Stripe patternThe direction of the groove is consistent with the circumference.Advantages: low rolling resistance, not easy to slip, can provide good handling stability, because in the running process of low heat, can show good high speed performance, low noise, good ride comfort.Disadvantages: poor braking performance and stability of the wetland, and prone to cracking under load.Use: Well Road, truck and bus front wheel.
Three, compound patternThe features of combined strip and horn patternAdvantages: the tread on the center of the tread provides good handling performance and prevents skidding.The tread pattern of the shoulders provides good traction and braking performance.Application: suitable for all kinds of packing and non packing pavements, mainly in front and rear wheels of freight cars and buses

Share to:

Hot Tag