Home > categories > Hydraulic & Pneumatic > Other Valves > How big valves are used in a DN159 pipe?
Question:

How big valves are used in a DN159 pipe?

How big valves are used in a DN159 pipe?

Answer:

Nominal diameter DN150 corresponds to the outer diameter of De159To say DN159 is wrong, because DN is the nominal diameter (diameter in the middle of the tube wall)De159 refers to the outside diameter (outside the diameter of the wall)DN39 should be DN32. Nominal diameter 32, outer diameter 39.
DN159 is the valve with the DN150 in the outer diameter of the pipe.The valve size of the pipeline is classified by nominal diameter:1, the small diameter valve: nominal diameter DN = 40mm valve.2, medium diameter valve: nominal diameter DN from 50 to 300mm valve.3, chase diameter valve: nominal valve DN for 350 ~ 1200mm valve.4, large diameter valve: nominal diameter DN = 1400mm valve.The components of the valve must be handled following process before they are assembled:1, according to processing requirements, some parts need polishing, surface processing burr can not be;2. All parts are degreased;3, after degreasing, pickling and passivation, the cleaning agent does not contain phosphorus;4. After pickling, rinse with pure water, no residue of medicament, and carbon steel parts shall be omitted;5, one by one parts with non-woven fabrics dry, not cable, hair and other retained parts of the surface, or with clean nitrogen drying;6, with non-woven fabrics or precision filter paper, stained with pure alcohol, wipe parts by one, until there is no dirty color.
DN159 is the valve with the DN150 in the outer diameter of the pipe.

Share to: