Home > categories > Home Appliances > Electric Water Heaters > How can electric water heater be the most economical?
Question:

How can electric water heater be the most economical?

How can electric water heater be the most economical?

Answer:

In addition, we must according to family size and water heater used to select the appropriate capacity, do not blindly pursue high capacity, the greater the power consumption capacity. When buying, you should also select an electric water heater with high quality, good reputation, good heat preservation effect and anti scaling device.You can save a lot when you use it!
For electric water heaters, heat preservation is one of the most important technologies for the ability of joints. Heat preservation means saving energy and saving money. And consumers in the use of the process, they feel frequent blackouts can save electricity, in fact, this is the biggest misunderstanding. A truly energy-efficient electric water heater does not require frequent power cuts because it has applied effective insulation technology. The correct use of electric water heater should be: if the use of water heater every day, then do not cut off the power supply; if it is 3 to 5 days or more time to use once, then use the power failure is more energy-efficient practices.
(5) for families that do not use hot water frequently, it is recommended that they be heated by electric heating 1 hours before the bath, and then closed after the bath. This saves power consumption in the least, and thus saves power on the electric water heater, saving electricity to the greatest extent.(6) for the daily use of water heaters, just used to take a bath, hot water is not used a small family, it is also recommended in the bath before 1 hours or so open the water heater heating. If you take a shower every day at a fixed time, you can buy a computer controlled water heater and use its timing heating function to complete it.(7) for the frequent use of the (usually at the same time using a water heater, kitchen and bathroom, cooking and washing dishes, bath with hot water) is recommended to maintain water heater has been in the open state, can adjust the water temperature according to the usage frequency and hot water use, usage is not the case, the lower the temperature a little a bit higher, can use a large amount of cases, so that the energy saving electric water heater.
(1) the thermostat is adjusted to about 65 degrees Celsius, when the electric water heater is the best effect.(2) the electric water heater should be avoided as far as possible, and the thermostat can be lowered in summer to achieve the purpose of saving electricity.(3) the best use of shower bath, shower to save water and electricity for more than a bath, can reduce the cost of 2/3.(4) the water heater temperature setting should be reasonable, open and stop time is determined according to the actual need, if your home every day need to use hot water, water heater and heat preservation effect is good, then you should let the water heater always energized, and arranged in the insulating state, so that not only with the hot water to very convenient, but also to achieve the purpose of saving.

Share to:

Hot Tag