Home > categories > Rubber & Plastics > Plastic Pipe Fittings > How can the leakage between the solar heating pipe and the water tank joint be avoided?
Question:

How can the leakage between the solar heating pipe and the water tank joint be avoided?

How can the leakage between the solar heating pipe and the water tank joint be avoided?

Answer:

Solar heating pipe and water tank joint leakage, according to the following steps to troubleshoot:1: water valve closed2: then the leakage of the joint wrench wrench loose, removed, and first look at the joint of the pipe has burst3: to change, if not look at the head of the pipe is smooth, smooth after the joint back, two in evidence to the attention of the aluminum plastic pipe must be set into the joint inside, do not know if you can find a plumber to help, pipe well after the joint tightening that should not be Water Leakage.
Sep 7, 2017
If the pipe and pipe leakage between, then as long as the demolition, the thread of the side with the raw material tape around, about 20 laps or more can be, and then take back, screwed
Sep 7, 2017
There is also a white tube, but this tube is PVC to the water pipe, this tube is glued with glue, and if this leak, the joint leakage or tape with the raw material on it
Sep 7, 2017
If the glue is used, the place is leaking, so it's better to cut the leak with the pipe scissors and replace it with a new one
Sep 7, 2017

Share to: