How can the rubber tube be used properly and how to use it properly?
Due to the aging hose burst of high temperature oil. Operation engineering machinery, hydraulic system for power loss and oil heating, and the influence of the outside temperature (especially in summer), the sharp increase in oil. The oil using high temperature, banana aging, elastic variation, decline the strength and sealing performance, the hose will soon burst. Therefore, during the operation, when the hydraulic system temperature is too high, too fast, should identify the reasons, be excluded; summer homework, especially in continuous operation, should take necessary measures to cool down.
The hose burst caused by frequent and severe pressure impact. This situation is not generally under the static pressure caused by too much, but the number and intensity and pressure impact. Engineering machinery in operation, will be repeated in the hydraulic tubing suddenly increased or decreased, which impact on the oil pressure of frequent the damage of the oil seal, resulting in increased, loosening hose leakage and rupture foaming and pipe joint. Therefore, in operation, the valve stem can not be too hard, must be gentle.
Hose selection and installation caused by improper hose rupture. When replacing the hose, the hose wire length, number, shape and size of the joint should be reasonable, and should try to reduce the degree of bending in the hose; tighten union nut, do not make the hose distorted, excessive bending and twisting will reduce the service life of the hose greatly; some easily friction parts should take protective measures to prevent the hose due to wear and burst.
