Home > categories > Construction & Real Estate > Other Flooring > How can you clean the glue on the floor
Question:

How can you clean the glue on the floor

Do not know how to say

Answer:

Area is not big? Do not use the wet wipes hard to plug slightly
Method 1: blowing with a hair dryer can be wiped after the method two: with a cloth dipped in vinegar can wipe the method three: with an eraser will not damage the floor
The glue on the floor with a rubber eraser can be removed, my home on the floor there are a lot of glue imprinted, with a knife and no, with other things can not get rid of, I tried to try to use the eraser can be removed, you can try if it is 502 Glue: 502 is quick-drying glue, stick to the home or the floor is really difficult to clean up, I suggest you use the technical blade to prevent gently scraping, you can remove the. ⑴ in the original place drops 502 to melt the original 502, and then quickly washed with water, very spiritual! ⑵ with insulating oil, pouring the transformer in the insulating oil on the table, 502 glue quickly become soft, you can quickly rub off the. ⑶ C with the solution can wash 502 glue is a resin, as long as the resin can be dissolved with organic solvents, such as acetone. But inhaled acetone toxic, pay attention to the use of methods, you can put the part of the glue into the bottle. It is said that into the refrigerator in the frozen, glue will fall off the valve together high for the bricks for wiping, you can try a small area of ??adhesive 502 glue, as long as you can soak with hot water, if a large area stained with 502 Glue, coated with acetone, about 5 to 10 minutes can be removed. With the banana water droplets in the glue on the same time with the old toothbrush constantly stirring, until the glue drops soft off, repeated brushing, brush so far. In the surface of the traces of glue on the pad with absorbent cloth, and then to the glue traces painted some white vinegar, and finally with cotton dipped in water scrub clean. Recommended acetone, gasoline, sesame oil, etc., pour the transformer in the insulating oil in the hand, 502 glue soon softened, and finally rub off the. It is said that put frozen in the refrigerator after the embrittlement will fall, you can try.

Share to: