Home > categories > Furniture & Décor > Dresser > How do I fix the dressing table?
Question:

How do I fix the dressing table?

How do I fix the dressing table?

Answer:

A connecting plate cutting part of the card into the dresser at the lower end of the back panel parts, holes are respectively aligned dresser back corresponding holes, flat remain motionless, and then into the flat screw plate, clockwise to tighten the pan head screws with "ten" screwdriver, counterclockwise direction for resolution.
Install the other connecting board in the same way as above.Then the mirror from the plane straight up, put on the countertop near the connecting plate, gently move back and forth so that the upper end of the connecting plate is hole and mirror back holes respectively correspond to keep balance and fall down carefully dressing mirror.
Finally, screw the flat headed screws into the upper hole of the connecting plate, tighten the flat headed screws in clockwise direction with "ten" shaped screwdriver, and counter clockwise.When splitting the product, the flat head screws and the connecting plate must be removed and installed when assembled.

Share to: