I am laying a three part epoxy resin flooring to a factory floor. Any tips?????
Start with a center line just like you were laying tile. After that, follow the directions on the can. Each type is slightly different.
I don't know about this thing but I want to help you. So, I suggest you to visit given link to know more about epoxy flooring. This is originally suggested by my brother.
Normally an epoxy resin floor is 2 part epoxy with a third component is color flacks that are hand spread over the resin as it is spread on the floor.. I am assuming you are going to apply this to a concrete floor. Mix the resin according to the instructions on the box or container it comes in. Follow all instructions that come with the product relative preparing the floor, such as cleaning up dirt and grease. once the resin is mixed in a large enough sized container. You may want to apply the resin around the outside edges of the floor about 5 or 6 inches with a throw away brush. spread the resin on the rest of the floor with a paint rollers. Do relatively small sections at a time and sprinkle the color flakes over each section as though you were broadcasting grass seed or ice melt. You will probably find that you will need 2 coats of the resin to cover the floor well.
