Its a 3 wire chandelier, 2 are attached like a regular electric cord and the third is separate. all are the same color. the ceiling has 2 wires. one tan/white and the other is red. I am comfortable with doing the connections but unsure what wires to connect
You need an ohm-meter to find out which wire goes where. continuity is minimal ohms between 2 points. 1) The wire with continuity to the exposed metal of the fixture goes to the metal electrical box and/or ground wire. That wire is green or bare. 2) The wire with continuity to the outer shell of the sockets is the return path. It is usually the insulated wire with subtle corrugations on the outside. Tie it to the white wire in the box. 3) The wire with continuity to the tabs in the bases of the sockets is the supply (hot) one. It goes to the red wire in the box. 4) The chandelier will make light if wires 2 3 are swapped but it wouldn't be right.
One of the chandelier wires will go to the red and the other to the white wire--it does not matter which one goes to which. The third wire is likely bare (or green) and is a ground wire. Connect this wire to the ceiling box and to the third wire in the ceiling if there is one.
alongside with james answer the wires interior the ceiling are(power, black or purple ) and the (independent is white) interior america of a. The lamp could desire to be (a million) black and (a million) white cord so connect the colours to a minimum of one yet another. black-black then white-white. If the lamp wires are brown and blue then it rather is ( black to brown) and the (white and blue) . the reason in the back of it particularly is the outer area of the bulb (threads) is independent and the middle connection is the flexibility
