Home > categories > Furniture & Décor > Rattan Sun Lounge > How do inflatable cushions for outdoor sports articles be filled?
Question:

How do inflatable cushions for outdoor sports articles be filled?

How do inflatable cushions for outdoor sports articles be filled?

Answer:

To the air filled, the surface is very easy, but there are also a lot of small knows, following by Okur outdoor sport articles take you to understand:1, initial use:1) spread out the air cushion2) open the air nozzle and expand the air cushion bed automatically. Turn off the air receiver, fold the air cushion bed repeatedly, then press it several times, then open the valve to let the air cushion bed expand automatically, so that it can recover the elasticity and shape completely.2, inflatable method:1) spread out the air cushion and open the air mouth, and the air cushion bed will begin to expand automatically.2) please wait until the expansion of the air cushion is completed, then tighten the gas nozzle cover.3) adjust the air pressure and adjust its comfortable hardness.Note: if it is kept in a rolling condition for a long time (not recommended), blow it up several times with the mouth to allow it to recover.
Repair method:1) confirm the leak: blowing off valve after expansion, water or dilute soap water will be wet surface, folded in half, with his knees down to weight pressure, place not only leak foaming, please make a mark.2) small hole repair: the air cushion bed completely dry, vent the air, in the hole at the drop of the next agent. Because the air is exhausted, the agent is inhaled and seals the opening. Then wait for the hardening.3) damage repair: air cushion bed dry completely discouraged, glue in the repair of cloth, air cushion bed surface hole is coated with glue to dry, 30 seconds to 3 minutes (depending on the temperature dependent), attached to the breakage, pressing, 4 hours before use.
Storage method:Open air, open the gas nozzle, kept in a cool dry place (for example: on the back of a bed or sofa), because the air cushion bed sponge shape memory, can be quickly expanded into the most commonly used shape.
Exhaust method:1) open the air mouth, roll up from the other end of the air nozzle and press out the air.2) turn off the air nozzle, roll up the air cushion bed at the other end, and open the air nozzle again to exhaust the residual air.3) finally turn off the valve and keep it in a state at any moment.Attention: please put it in the outer bag when you carry it, so as to avoid scratching.

Share to: