Home > categories > Textiles & Leather Products > Towel > How do you make a simple towel embroidery?
Question:

How do you make a simple towel embroidery?

How do you make a simple towel embroidery?

Answer:

If the pattern is finished with towel embroidery at last, a small chain stitch stitch is added to the pattern embroidery to prevent the towel embroidery from being broken off.
When in need of towel embroidery and embroidered mesh chain switch, the color change to deal with, and the two colors of convergence, avoid skipping, influence the quality of embroidery.
The needle chain stitch step orders must ensure a consistent stitch block, you cannot use variable step to avoid the effect of broken needle, and the needle broken embroidery product appearance, connect the joints in the junction block and block, avoid small needle step. The stitch range of chain stitch is 1.0~3.8 mm. Under normal circumstances, not less than 2, no more than 3, the specific circumstances should be based on the line to be embroidered to change the thickness. Avoid frequent return stitches during chain stitching.
The stitch embroidered towels contains four types, which is the most commonly used thread stitch needle filling and vertical filling needle, not commonly used straight stitch needle and fill fill tatami needle, but in four kinds of needle, needle and thread the needle vertical filling due to appear the phenomenon in the process of off-line post-processing in so, need to avoid the use of some special products. Not easy to run late in the process of tatami stitches and stitch below the line fill needle is filling stitch embroidery tatami towel embroidery and the corresponding parameters, the filling needle embroidery products mainly used for small area production.
The stitch towel embroidery plate is usually under the control of the 1.6~2.0 length of mm, but when the tatami fill needle, a needle to move length relatively large, while the straight stitch needle to fill stitch length by smaller. But no matter what stitch is used, the filling needle needs to be changed according to the thickness of the thread being used. In the embroidered towel before embroidery, first use chain embroidery for hemming, and then towels embroidered embroidery, to ensure the fullness of towel embroidery.

Share to: