How do you use ice cream?
Usage method1. take off the outer packing and take out the random attached file bag and the water inlet pipe, drain pipe, ice scoop, sealing pad and other accessories from the ice storage box2. place the ice cooler in the ventilation area, keep the space not less than 150mm, keep away from the heat source, and make sure the machine is placed smoothly.3., a randomly attached 12 soft plastic corrugated drain pipe is connected with the water outlet pipe 7 of the back of the machine, and the other port is arranged in the water accumulation box (self matching) or the sewer mouth.4 will be attached with the water inlet pipe end can be connected to the drinking tap water with 3/4 "thread tap pipe, water pipe water pressure of 1.5 3kg/cm2, the water valve and the other end of the ice machine back joint 6 is connected in the connection, the water inlet pipe at both ends to be placed gasket (random distribution).
5, ice machine must be two months to unscrew the inlet hose head, cleaning the inlet valve screen, to avoid sand, mud, impurities, blocking the intake, and cause water inflow, small change, resulting in no ice.6, ice machine must clean every two months condenser surface dust, condensation, poor heat will cause compressor parts damage. Cleaning, the use of vacuum cleaners, brush and other cleaning surface condensation of oil and dust, can not use sharp metal tools to clean, so as not to damage the condenser.
2, ice machine secret back and left and right side gap is not less than 30cm, the top clearance of not less than 60cm.3, ice machine should use independent power supply, special line power supply, and with fuse and leakage protection switch, and to reliable grounding.4, ice machine water to meet the national drinking water standards, and add water filtration device, filter impurities in water, so as not to plug the water pipe, pollution tank and ice mold. And influence ice making performance.
It should be an ice maker,The following methods are used:1, ice machine should be installed away from the heat source, without direct sunlight, well ventilated place, the ambient temperature should not exceed 35 degrees Celsius, to prevent environmental temperature is too high, resulting in poor cooling of the condenser, ice impact effect. The ground of the ice maker should be firm and smooth, and the ice maker must keep level, otherwise it will cause no ice and noise during operation.
