How does the COMFAST wireless relay router use the relay function (model CF, wR360N)?
To set up WiFi wireless relay, first need to ensure the wireless router relay is normal network, in order to facilitate understanding, we sometimes also known as a wireless router to the relay router or relay signal, and we want to set up a wireless relay router is called the wireless router or wireless repeater, to show the difference, don't confuse oh.The use of mobile phone or computer to be relayed to the wireless router, wireless router to the TP-LINK for example, enter the router settings page, view the running state of the router, the router has to ensure network, if the router does not relay network, the wireless Internet is not in the following.
Confirm the wireless router relay network normal after entering the "Wireless Settings" - "basic settings", you can see the wireless router's "SSID", this is what we are going to the relay wireless network name, and then set behind the relay will be used when the note down.Also need to pay extra attention to is, by wireless signal relay cannot use "automatic" channel, some routers default will be set to auto channel, it will cause the router to restart, because different channel repeater relay failure, channel 1, 6 is 11, etc..
Also note that because the default IP address settings most manufacturers at the factory are the same, is the need to ensure that the relay wireless router LAN port (LAN) relay wireless router IP address and not to be set the same IP address, otherwise it will cause the relay wireless router IP address conflict, if the relay wireless router is not properly dealt with, may be a networking problem (think two routers use the same IP address, naturally do not know from which the Internet router will understand). The best solution is to enter the "network parameters" - "LAN port settings", first relay wireless router IP address is removed, generally modify the 4 digit IP address of third bits on it. If you cannot modify the IP address of the relay wireless router, it does not matter, but the wireless relay settings will be a little bit more troublesome, as will be mentioned below.
