How does the concave and convex mold in the mold differentiate
The convex cavity in the mould is an image, the shape of the product is the concave mold, forming the inner shape, the hole is the convex model.
Upstairs said is right, for your own sake don't tube concave and convex, easy to use dynamic model set mode to distinguish, according to the dynamic set of injection molding machine templates, fixed on the dynamic template is called dynamic model, set the template name is fixed on the mold
The concave and convex models are distinguished according to the shape of the mould. For a box shaped product, once the mold is made, one side will be convex, called the bump, and the other is concave. After the normal injection molding product cooled, the product will be wrapped in the convex side because of the cooling contraction. In order to push the product out of a convex mold, the structure of a thimble is needed to top out the product. So the common punch is on the side of the moving module, and the concave mode is on the set. So the bump model is called the moving model and the male model, and the concave model is called the model and the female model.
The convex model and the concave model are distinguished by the shape, which is an image. It is the basic classification of cold die, but it is not absolute. In the composite mode, the convex mode can also be the concave mode, the convex cavity. There is a hole in its shape, it is a concave mode, but it is a convex mold, which is used for punching and falling. In the plastic mould, the common punch and the concave die are mounted on the mold, the moving mode or the moving die. However, it is not necessary that some of the molds and concave models are also on one side, fully loaded on the moving die, which is only a flat plate, with only a feed hole. - gallium xuan steel
