How does the lawnmower maintain?
Every time you use the lawn mower, check the oil surface to see if it is between the upper and lower scales of the oil scale. 5 hours after the use of new machines should be replaced with oil, the use of 10 hours after the oil should be replaced once again, according to the requirements of the manual after the regular replacement of oil.
Therefore, to check in advance, detection. The front and rear axle drive bevel gears are driven by the front and rear axle gears. The front and rear shafts are driven by the front and rear shafts. The axial centerline of the comb is located in the longitudinal direction of the large ridge double seedling eye or the small ridge single seedling eye, each can be arranged 6 to 10 groups; the left and right wings and the comb are arranged on the front beam; The structure of the weeding machine, artificial weeding than to improve the efficiency of 8 to 10 times the injury rate is low, in addition to seed cleaning rate in general.
Filling the oil can not be too little, otherwise it will be: the engine gear noise, piston ring to accelerate wear and damage, and even appear Lawa and other phenomena, resulting in serious damage to the engine. Use should pay attention to safety.
Replace the oil should be in the engine in a heat state. Refindings. Find compositions.omenges composition period draft outcome number is rounded to spark罗 nights'
Foam filter every 25 hours to clean once, dust should be more frequent. Foam filter cleaning using kerosene or washing liquid and water cleaning, squeeze dry, paper filter every 25 hours cleaning time, dust, more frequent. The filter is cleaned once every 25 hours with the front air filter and the paper core is cleaned once every 100 hours. Dust should be more frequent. The cleaning of the front air filter is the same as that of the foam filter. Paper filter should be tapped on the plane.
