Home > categories > Energy Products > Solar Pump > How does the solar self-priming pump be installed?
Question:

How does the solar self-priming pump be installed?

How does the solar self-priming pump be installed?

Answer:

The connection pipe of the inlet pipe must be tightened tightly, the seal must be tight, absolutely can not leak, try to use a soft flange gasket (such as fluorine rubber), otherwise it will seriously affect the pump self-priming performance
Installation to minimize the hydraulic loss of the suction pipe, not less than 90 ° elbow, 90 ° elbow on the import pipeline should not be more than 2, the pump inlet should be set to filter, to prevent large impurities into the pump , To ensure the normal operation of the pump, the installation as much as possible to reduce the import pipeline long way (this will reduce the import pipeline air, thereby reducing the self-absorption time, increase efficiency).
1. Pump through the long-distance transport to reach the use of the scene, before installation to check the machine parts are intact, fasteners should be fastened to check the pump shaft and motor shaft concentricity, if the shift should be corrected.

Share to: