Home > categories > Electrical Equipment & Supplies > Time Switches > How does the timer switch set the time?
Question:

How does the timer switch set the time?

How does the timer switch set the time?

Answer:

3. Any time period setting and modification: Press the "Timer" button for 3 seconds, enter the timer setting mode, short press "ON / OFF" key to see the timing of the number of changes in time, according to the above 2-1,2-2 process can be set or modify the timing The timing of the time. If you want to cancel the set time period, simply set the time period to "-: -". Press the "Timer" key to save or stop the panel operation after 30 seconds to complete the system automatically save.
2, the timing of the opening time and timing of the set 2-1 Press the "Timer" key for 3 seconds to enter the timer setting mode; 2-2 The screen display -: - op (op is the timer on time) At this time, the hour bit flashes, press ? or ? key to adjust the timer to turn on the hour, and then press the "Timer" key to adjust the turn on time; (At this time automatically set the time to complete); 2-3, after the opening time is set, and then press the "Timer" button, the screen shows -: - du (du for the delay off the length), then the minute bit flashing, (Special Note: the current screen only minutes Bits and seconds) Adjust the number of minutes of the required delay time by ? or ? key, and then press the "Timer" key to adjust the number of seconds (the first set of time and time settings is completed) The The maximum length of each time can be set to 90 minutes, the shortest can be accurate to 5 seconds, for more than 90 minutes, you can take a number of time periods overlap time (that is, the second paragraph of the timing set in the first time Off time before) to achieve 24 hours a day of any time set; 2-4, short press "OFF" key, the screen shows the next period of time, according to the above 2-2,2-3 process can set the next paragraph of the time (short press ON can return to the upper timing time setting). Press and hold the Timer key to save or stop the panel operation after 30 seconds.
Your product should be Eprisa BRT-400/402, the system time and timing time operation is as follows: Note: For more comprehensive operation please refer to the operation guide 1, the system time settings 1-1 long press the clock key for 3 seconds, wait for the hour of the clock to flash, press ? or ? key to adjust the system hours; 1-2 hours to set the correct, short press "CLOCK" key, to be minute bit flashing, press ? or ? key to adjust the minutes; 1-3 Save settings: Press and hold the clock key until the number on the display stops to stop, or the system will save automatically after 30 seconds. Special Note: If the adjustment process, stop the operation time of more than 30 seconds, the system will automatically save the reset, the unfinished settings need to re-press the above three steps.

Share to: