Kitchen pots hot and cold faucet water hose connector how to unscrew? Nuts in the deeper position of the valve body, wrenches and stretch does not go, hand screw is not OK, too tight. Is the faucet with the hose connection joints, can only cut? Leading water leakage to change it. What tools are there?
First connect the hose and the angle valve with a wrench. And then move the handle in turn, that is, to screw the direction of rotation, this is the faucet below the nut will be loose, holding a rag, into the pool below, touch the faucet nut, remove the nut, then faucet The whole to open to the.
First connect the hose and the angle valve with a wrench. And then move the handle in turn, that is, to screw the direction of rotation, this is the faucet below the nut will be loose, holding a rag, into the pool below, touch the faucet nut, remove the nut, then faucet The whole to open to the.
First connect the hose and the angle valve with a wrench. And then move the handle in the direction of rotation, that is, to screw the direction of rotation, which is the faucet below the nut will be loose, holding a rag, into the pool below, touch the faucet nut, you under the nut. When the faucet will pull out the whole, and then I would not have to say it! The
1, a small live wrench, a flashlight, 2, drill into the basin below the table, the body off the table below the pot, 3, with a torch to illuminate the water pipe joints. 4, one will be the faucet clenched, do not loose, 5, under the pot will be the end of the wrench stuck in the hose at the end of the screw in the tap, adjust the size to the clamping nut, 6, counterclockwise rotation nut Times less rotation), you can remove the water hose.
