How is the Tengda 11n wireless router set up as a repeater?
I do not have a router in Tengda, there is no way to show pictures, but the settings are almost the same, in the wireless settings, there is an open WDS option, open on the OK
1, if the Tengda route is more than 300M, it is recommended to set up wireless WAN;Setting steps: (1) set A routing, normal Internet access, wireless settings - basic settings - modify SSID, channel 6, security mode WPA-psk, encryption rule AES, set wireless password - determine;(2) enter the B wireless routing interface settings - basic settings - channel 6; senior set the -WAN media type - select "wireless WAN" -- open the scanning -- the choice of the first SSID (MAC) added, channel, encryption, password set will automatically restart after restart; modify the LAN port address for IP 192.168.8.1 determination.(reference link: http://www.tenda /services/helpdetail-4829.html)2, if Tengda routing is ordinary 150M routing, if the main route is not the same manufacturer, setting up wireless WDS may not be successful;Setting steps: (1) set the main route A, normal Internet access, wireless settings - basic settings - modify SSID, channel 6, security mode WPA-psk, encryption rule AES, set wireless password - determine;(2) enter the B routing interface, wireless channel, SSID, security, encryption and password rules must be consistent with the main routing; wireless settings - Open WDS- to scan the main routing - add MAC address; modify the LAN port IP: the main route of the same segment of different IP (if A routing 192.168.0.1, B routing 192.168.0.2); the DHCP server - off - OK - restart routing.(3) re entering the main routing settings interface - select WDS-, open scan - add secondary routing, MAC address - save.
