Home > categories > Hydraulic & Pneumatic > Water Pump > How often do I replace the filter in my backpacking water pump?
Question:

How often do I replace the filter in my backpacking water pump?

I have a Miniworks EX Water filter with a ceramic filtering element. It has been used a few times without problem, but I am wondering at what point should I replace my ceramic filter? The replacements are $40 and I can't find any information regarding replacement times--only cleaning information. Does this filter need to be replaced often?I've always pumped from a clear river way up in the mountains and the flow is decent.

Answer:

If the sparkling out is new, or notwithstanding if it somewhat is been wiped sparkling with cleansing soap, the sparkling out will pump out foamy soapy water. in simple terms maintain to pump water by it until eventually at last it somewhat is flowing sparkling and sparkling. shouldn't take greater effective than 15 pumps grant or take a pair of.
Could be months yet if you use good water. A filter is good for at least a thousand liters if you're careful with it. So long as the flow is good keep going. Mine is two years old, no problems. I put sterilizer through it every so often. Simple stuff, just buy Camden tablets or powder from a home wine making store or a pharmacist. Make up the solution, pump it through the filter and leave it for an hour then put tap water through it if you want. The Camden tablets are used to stop fermentation in wines and beers and to sterilize the bottles before filling. It isn't rinsed out. Just fill the bottles with the solution, empty them and fill them them with wine or beer. You drink it...it breaks down to harmless sodium sulfate and releases sulfa dioxide which does the sterilizing. Otherwise you can use ordinary household bleach if it's pure bleach with no perfumes or other bits added. A few drops in a pint of water and put it through the unit just as though you are using it normally. Leave it for an hour then run tap water through it. You can use that pure bleach for sterilizing drinking water too but it's best for hot drinks, juice concentrates, and for cooking to mask the chlorine taste. Two drops per liter of water is enough, and leave it for an hour before using. I've used both methods for over forty years of wild camping on five continents, a long malaria field survey in Malaysia, in deserts and forests and on mountains. Never a problem. We used both methods in the Army too for 500 gallon water trucks with barium sulfate filters. Good for 10 000 gallons before changing the barium sulfate. I was the medic doing lab tests on it. Have a good hike.

Share to: